How to use Launch BST-460 Battery System Tester

Launch BST-460 Battery System Tester, with world's most advanced conductance testing technology, can easily, quickly and accurately measure the actual cold cranking current capability to judge the health status of the battery itself, and to detect common faults of both starting and generator charging systems, which help maintenance personnel to achieve quick repair to the vehicle trouble.
How to use Launch BST-460 Battery System Tester?
After entering battery test program, Launch BST-460 Battery System Tester will display the tester model and version approx. The tester will display the following contents in a sequence, select the desired items accordingly.
Step 1. Press UP/DOWN key to select the battery location, in-vehicle or out-of-vehicle, then press OK key to confirm. IN-VEHICLE means the battery is connected with vehicle engine or vehicle electrical appliance. When the tester detects surface charge, a prompt message SURFACE CHARGE DETECTED, TURN LIGHTS ON will appear on the screen. Follow the instructions to turn lights on to eliminate battery surface charge, the tester will then display the following messages in a sequence: HEADLIGHTS ON TURN LIGHTS OFF Now the tester detects the surface charge has been eliminated, turn lights off as prompted, then press OK key. Launch BST-460 Battery System Tester tester will recover automatic test.
OUT-OF-VEHICLE means battery is not connected with any of the vehicle load, namely, battery connection is cut off.
Step 2. After selecting the battery location, the tester will prompt to select the battery charge status, i.e. Before Charging or After Charging. Press UP/DOWN key to select, then press OK key to confirm. In this way, it ensures a more accurate result.
Step 3. After the battery charge status is chosen, the tester will enter battery type selection interface: Regular Flooded, AGM Flat Plate, AGM Spiral or Gel battery. Press UP/DOWN key to select, and press OK key to confirm. When its IN-VEHICLE test, battery installation type shall also be selected, e.g. TOP POST, SIDE POST or REMOTE (This selection does not apply to OUT-OF-VEHICLE), then press OK key to confirm. REMOTE is applicable to some in-vehicle battery which is too tightly installed to use the test clamps to connect the battery poles.
Step 4. Launch BST-460 Battery System Tester battery tester will test each battery according to the elected system and rating. Use UP/DOWN key to select according to the actual system standard and rating marked on the battery. Input correct test standard and rating, press OK key, the tester starts to test. It takes around 3 seconds to display the battery test result.
NEXIQ 125032 USB Link communication box supports Heavy-Duty, Light-and Medium-Duty Trucks, construction equipment like (Wheel loader, Articulated Hauler and Excavator), Genset. Nexiq usb link with full NEXIQ 125032 USB Link torrent software.

Articles Source:http://cnautotool.tumblr.com/.