What is funtion of Porsche Piwis II Engineering Mode ?

Porsche Diagnostic Tool, Porsche Piwis 2 with regular version and Piwis 2 engineering mode, what’s the Piwis tester ii developer mode spcial? what can the Porsche piwis II engineering mode do? Here CnAutotool.com share PIWIS II developer mode function as following help to customer choose it.
The software version is:V18.100
Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.


What is funtion of Porsche Piwis Tester II Engineering mode ?

1. Start/stop”LAST MODE”wait for stopping the engine and change memory
2. Spoiler”lessen time when the car starts
3. Spoiler”fixed”
4. Spoiler”change angle”
5. Change VO code
6. Close Air Mercury
7. Upgrade power
8. Remove the tire pressure sensor
9. Install reversing camera
10. Install USB/BT
11. Close the seat belt warning
12. Change CDR/PCM operation interface
13. Air condition memorization
14. Start CDR_AUX
15. Open the PCM function
16. Manually set codes
17. Automatically set codes
18. Manually do programming
19. Automatically do programming

PIWIS II Developer Mode software display:




Piwis Tester II Vehicle Coverage:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera
6. Support 2013 year for Porsche car models

http://obdscanner.info/2017/07/20/what-is-funtion-of-porsche-piwis-ii-engineering-mode/

How to read Renault Grand Scenic pin code by OBDSTAR X300 DP?

It’s very easy OBDSTAR X300 DP read pin code for Renault Grand Scenic! Just a 2 minute job.
Check below how-to steps X300 DP read Renault Grand Scenic pin code fast?
First, connect OBDSTAR Scaner X300 DP Bluetooth VCI box with Renault Grand Scenic OBD port.
Turn on car ignition.
Pair the VCI box Bluetooth with OBDSTAR X300 DP. (After success, the VCI box Power indicator and Bluetooth indicator will be both on)
Next, enter the main menu and click “Diag Program”.
Agree with the tips.

Then, go to choose “IMMOBILISER” and select “Renault” icon.

Open OBDSTAR X300 DP Renault V30.11 software.

Last step, choose “Pin Code Read” function and “Type 2”.

Follow the instruction:
Remove Renault Grand Scenic key card and turn off ignition.
Press the car Start button and click “Enter” to go on.
Wait about only 1 minute and Renault Grand Scenic pin code reading will be complete!

OBDSTAR X300 DP successfully read Renault Grand Scenic pin code! Totally it will cost 2 minutes and things done easily!

CnAutotool.comall rights reserved, Original Article url:How to read Renault Grand Scenic pin code by OBDSTAR X300 DP?

How to repair Mercedes W204 ESL/ELV steering wheel lock

This is a thread of “Mercedes W204 Steering wheel lock remove to repair DIY”. Big thanks to the contributor @dannyhoang9 from https://mbworld.org/ forum, shares good tips with us.
Here’s the story of his Mercedes W204 steering lock replacement:
Bought my car from the auction, run and start fine when I try to move it out of the parking so the tow truck can tow it to my shop.
No damaged to front end or steering wheel when at the site. After the tow truck tow it to my shop with the dolly, only tow rear wheel but not locking the steering wheel with seatbelt. The Mercedes Scan Tool will not start, no crank I can turn the car to all the way but no thing happen !
Jump start but still cant start ! Check the battery, still have good voltage
Steering wheel just locked, can’t move ?! Lock like something prevent the steering wheel so the key not working
I try to find the electronic steering lock but can’t see it because it was hide deep the back of the steering column.
As I know there no diy or instruction for the steering lock remove for now so I will take the picture and help people like me wont have to pay thousand $$$! In repair bill at the dealer.
The ESL ( electronic steering lock ) cost $500 , you will need the key $300 to sync, program new ESL to make it working with the key, EIS ( electronic ignition switch ) plus labor for remove,install and program for MB dealer !
my cost only $60 to shipped the whole steering column with Mercedes ESL EIS and key, $500 to repair with 1 year warranty to ESL take me 15 minutes to remove and 25 minutes to put everything back.
You need 3 things :
W204 ESL EIS and car key to rebuilt, repair it DIY

The tools :
Torx 25 27
hex socket 10 mm
U joint 3/8 with socket extension
1) disconnect the car battery
2) using torx?27 to remove 2 bolts behind the steering wheel
3) using 10 mm hex socket to remove the bolt in the center of the wheel remove the to plug of the airbag
3) using 10?mm?hex?socket to remove the bolt in the center of the wheel
remove the 2 plug of the airbag
pull its out
4) Using the E 28 external torx remove the 4 bolt on 4 side of the steering column
5) you have to remove the cable and pull it out
6) you can see the ESL in the back of steering column with the Mercedes Star Diagnosis






7) to remove the EIS , take the small flat?head?screw?driver and put it into the key ring, rotate it counter clockwise


On left top of the EIS, using the flat head to pry the black plastic retain that lock the EIS to the dashboard and pull it out from the back

remove the bolt that connect the steering column to the steering shaft.
Done.

http://autotool.biz/2017/06/26/how-to-repair-mercedes-w204-eslelv-steering-wheel-lock/