in the event you probably did not adhere to the guidance and let Windows select it can be individual (incorrect) USB system driver, then you definitely have to update the USB driver.
You'd almost certainly only be accomplishing this in case you are suspecting a USB driver issue, or when you have put in the wrong USB driver to begin with (allowed Windows to decide on it is really possess driver)
There are actually two ways of performing GS-911.
you can both uninstall the USB driver and thereafter follow the proper USB driver set up procedure
you'll be able to right-click within the USB driver and update it for the suitable one...
Below is is step-by-step How-to.. by www.cnautotool.com
plug your GS911 into a USB port (not plugged right into a bike)
now get to the Unit Manager (any normal Windows consumer should be ready for getting to your Gadget Manager - there are lots of means - here is surely an illustration...)
Begin -> Management Panel -> Process -> Hardware Tab -> Gadget Manager
When you might be inside the Machine Supervisor, broaden the Universal Serial Bus controller section, and you also ought to see a GS-911 unit (if it is plugged into your personal computer at this second!)
If you right-click on it, you may come to a decision irrespective of whether to settle on the "Update driver..." choice (updating to the proper just one, follwoing a similar guidelines as you would when putting in a fresh one particular, i.e NOT permitting windows selected it is personal driver)
Alternatively you could choose the "Uninstall" solution, and there right after stick to exactly the same guidelines when you would when setting up a new one, i.e. NOT permitting home windows choose it really is very own driver)
http://obd2scantool.net/2016/07/18/volvo-88890300-vocom-interface-description/
No comments:
Post a Comment